Sliding doors for a bathtub or a walk-in shower
Draft — not yet approved by the owner. Nothing on this page may be relied on. It stays a draft until the owner reviews and approves it.
On this page
GLASSCORE lists sliding doors for two kinds of opening: over a bathtub, and in a walk-in shower. Each door is listed for the kind of opening it is made for.
Bathtub openings
A bathtub door stands on the edge of the tub and runs from wall to wall across it. Measure the width at the top, the middle and the bottom of the opening, and the height from the tub edge. The tub edge has to be level and flat along its whole length for the rail to sit properly.
Walk-in openings
A walk-in door stands on a curb or on a level floor. Measure the width the same way, and the height from the curb or the floor. Check that the curb is level and wide enough for the door bottom the product page describes.
Before you order
Compare your smallest measured width with the range the door lists. Go over the measurements with your installer: nothing on this site confirms that a door fits your bathroom.
Shop
Each product page lists its own measurements and requirements. Check them against your bathroom before you order.
More help
- Measuring your opening
- Delivery
- Returns
- Warranty
- Sliding or hinged shower doors: how they differ
- Choosing a hardware finish
- Will this hardware fit my shower glass?
- LED mirrors: size and power
- Smart toilets: rough-in and power
Still have a question?
Send a support request from the help centre. It is stored with a reference you can quote later.

